文章详情
您所在位置:首页 > 就业招聘 > 英飞凌CE部门招收博士生

英飞凌CE部门招收博士生

2011-04-14来源: 电院石老师浏览次数:
英飞凌公司计划进一步扩充Concept Engineering部门力量,需要从学校招收一批优秀的博士生。有关岗位描述和职位要求具体见附件。
如果这些博士生能迅速到岗当然很好,如不能立即到岗(如明年毕业的博士生),也愿意与其建立起联系或者为其提供一定的实习机会。
 
联系方式:hr-xian@infineon.com
 
英飞凌IFCX Open Positions JD-CE 2011.doc
    
Job Profile List:
 
1.          HWA (HW architecture) Concept Engineer
2.          HWA (HW architecture) Concept Engineering Manager
3.          MOD (Modem) L1P Concept Engineer for TD-SCDMA
4.          MOD (Modem) Concept Engineer for FW Architect TD-SCDMA/ TD-LTE
5.          MOD (Modem) Concept Engineer for DSP FW Architect 2G
6.          Platform Concept Engineer
7.          Platform Concept Engineer (Feature Requirement Management)
 
 
 
1.    HWA (HW architecture) Concept Engineer
 
Job Description:
As a member of Concept Engineering Hardware Architecture team that specifies the solutions for 2.5G and 3G handset baseband chips, the candidate will be responsible for the Digital Baseband portion of the solution. This includes the overall HW architecture meeting the functionality and performance specified by the System Requirements.  The candidate would be responsible for generating the Sub-System Requirements, allocating the system requirements to the different baseband subsystems of the solution and specifying the implementation architecture to meet the requirements.  The responsibilities of the Hardware Architect include some or all of the following:
·          Definition of Digital Baseband HW architecture
·          Deep understanding of ARM/DSP based SoC architectures, bus architectures, peripherals, and security features.
·          Ability to design, implement, and simulate system models for architecture trade-off and bandwidth analysis
·          Understanding of power savings techniques, technology, and algorithms
·          Ability to review and analyze process technologies and process options in support of low power design
·          Understanding of low power IC design architectures and system design architectures.
·          Understanding of GSM/GPRS/UMTS Handset systems
·          Digital baseband HW architectures and interfaces
·          Analog baseband HW architectures and interfaces
·          Power management IC HW architectures and interfaces
·          Radio/RF HW architectures and interfaces
·          Knowledge of external component functionality and interfaces: memory, display, camera, external memory cards, connectivity (USB, BT, etc.)
·          Understanding of IC design process and designs
·          Process technologies, standard cell libraries, memories, PLL’s, clock generation, I/O buffers-
·          IC design, simulation, and testing methodologies
·          Comprehend and communicate competitor Digital Baseband architectures and capabilities.
·          Develop System Functional specifications that will be used to guide the Development organizations during product development. 
·          Generate system level requirements for the Digital Baseband portion of a product based on Marketing Requirements Document and industry norms.
 
Requirements:
·          Ph.D or Master Degree on Electronics Engineering/Communication/ Microelectronics or relevant
 
·          Minimum 7 years Engineering experience, 10 years Engineering experience will be preferred
·          Experience with ARM based SoC architecture solutions
·          Excellent communicator
·          Must be able to work with people in many different cultures and in off-site locations
·          Excellent team player
·          Quick learner
·          Able to deliver quality products on schedule
·          Willing to work within a sensible development process framework 
·          Committed to documenting the development work
·          The following skills and Experiences will be preferred:
·        Proven experimental skills and lab/bench expertise
·        Experience with system feature requirements development and management
·        Experience with DSP and/or ARM embedded processor development.
·        Experience with 3GPP Standard
·        Experience with the SW and/or HW development of Communication systems
·        Experience with low power design
·        Experience with system modeling tools
 
 
 
2.    HWA (HW architecture) Concept Engineering Manager
 
Job Description:
Build up and lead a world class hardware architecture team as a subgroup of the world wide HWA department to maintain leading edge hardware architecture/solutions for mobile terminals
·        Develops the team to cope with current and future challenges for baseband chip hardware architecture
·        Develops effective relationships with customers, contractors, clients, universities and partners.
·        Responsible for proposing, developing and implementing leading edge architectural and IPR solutions for mobile terminal baseband/hardware projects and products
·        Responsible for the development and continuous improvement of tools and methodologies relate to the HWA deliverables
·        Handles all aspects of team’s performance management.
·        Staffing, recruitment and integration of new employees
·        Teambuilding, coaching, conflict management and fostering Infineon’s values
·        Interfaces with the Component Development team, program management, and project management to resolve technical issues, to allocate resources to projects and to satisfy customer needs.
·        Responsible for project planning for HWA team activities, as well as on time and within scope HWA deliverables to projects
·        Applies lessons learned from current customer/platform issues to enhance future HW architectures, as well as influencing HW/SW partitioning
·        Serves as communication link between his team and management in order to cascade goals and strategy downwards and to surface issues upwards.
·        Supports marketing and sales in discussions with customers, partners and operators
·        Full responsibility for functional budget to include but not limited to; functional HC, expense, capital equipment, T&L and training
·        Leads a team of 5-10 hardware architect Engineers
 
Requirements:
·        Ph.D or Masters degree of communication engineering or related field
·        Minimum 7 years experience as functional manager in a Integrated Circuit company
·        Minimum 8 years experience in a hardware architecture/development organization in the baseband mobile phone business
·        Efficient, cost-effective team with rich blend of key competencies
·        Highly motivated, high performance team which attracts high caliber concept engineers from other companies
·        Continuous improvement of hardware architecture (cost, performance, functionality)
·        Reduction of customization costs by ensuring high re-use of existing HW IP
·        Excellent Communication with Project Managers, Program Managers, and the other development organizations
·        Performance management including 100% of objectives set for all employees; full compliance with spirit and intent of STEPs process
·        Achievement of personal and team objectives; focus on “what” and “how”
·          Fluent in spoken and written English
 
 
3.    MOD (Modem) L1P Concept Engineer for TD-SCDMA
 
 
Job Description:
·          Perform Research in the area of wireless communication mainly focusing on TD-SCDMA L1, EDGE evolution, 3G, 4G and LTE  
·          Take responsibility for defining detailed implementation specification based on feature requirement for implementation team
·          Take responsibility for software and hardware partition for wireless transceiver
·          Take responsibility for defining detailed implementation specification of algorithm for wireless transceiver
·          Take responsibility for defining hardware interfaces and system resources according to performance requirements
·          Modeling and Simulation of Signal Processing Blocks
·          Modeling and Simulation of bandwidth and performance requirements
·          System level modeling and reference data generation for verification
·          Take responsibility for verification objective review
·          Take responsibility for defining use case of block
·          Tracking and participating in standardization process
 
 
Requirements:
·          Ph.D or Master Degree Electronics Engineering/signal processing/wireless Communication/telecommunication or relevant.
·          Good knowledge of wireless communication system standard, prefer experience in TD-SCDMA 
·          Good knowledge of digital signal processing 
·          Good understanding of modulation and demodulation algorithms for wireless communication 
·          Good communication skill and good team work
·          Good knowledge of MATLAB, CoCentric and SystemC is preferred 
·          Experienced in VHDL /Verilog coding is preferred. 
 
 
4.    MOD (Modem) Concept Engineer for FW Architect TD-SCDMA/ TD-LTE
 
Job Description:
Definition and design of Layer 1 Firmware for the TD-SCDMA/TD-LTE wireless standard.
·          Architecture definition for TD-SCDMA/TD-LTE firmware
·        Mapping of TD-SCDMA/TD-LTE features and standard requirements to FW and algorithm requirements
·        Breakdown of requirements into FW components
·        Identify all relevant FW aspects for the TD-SCDMA/TD-LTE standard
·        Define scheduling and task priorities of FW components with respect to given real-time constraints and system resources (MIPS, memory) in a TD-SCDMA/TD-LTE system
·          Concepts for partitioning between HW and FW (HW/FW split) in a TD-SCDMA system
·          Verification concepts for TD-SCDMA/TD-LTE FW on block and system level
·          Planning and selection of scheduling software
·          Provide guidelines for implementation aspects of modem algorithms in a TD-SCDMA/TD-LTE system
·          Customer interface for TD-SCDMA/TD-LTE FW related topics
 
 
Requirements:
·          Ph.D or Master degree in Electrical Engineering with focus on Communications Engineering
·          Expert knowledge in Digital Signal Processing and Communications Engineering
·          Proven experience in implementing DSP FW for 3GPP Standards like TD-SCDMA/TD-LTE or UMTS
·          Experience in SW/FW design for embedded real-time systems
·          Fluent in spoken and written English
 
 
5.           MOD (Modem) Concept Engineer for DSP FW Architect 2G
 
Job Description:
Definition and design of DSP Firmware for 2G (GSM, GPRS, EDGE, EDGE Evolution) wireless baseband applications.
·          Architecture definition for 2G DSP firmware
·        Mapping of given 2G features and algorithms to DSP FW requirements
·        Breakdown of requirements into FW components
·        Identify all relevant FW aspects in a 2G wireless system
·        Define scheduling and task priorities of FW components with respect to given real-time constraints and system resources (MIPS, memory) in a 2G system
·          Concepts for partitioning between HW and FW (HW/FW split)
·          Interface definition of HW accelerator blocks for selected DSP tasks
·          Planning and selection of scheduling software for real-time operation in a 2G system
·          Verification concepts for DSP FW on block and system level
·          Provide guidelines for implementation aspects of modem algorithms (how can this algorithm be implemented)
·          Support definition and design of HW accelerator blocks for selected DSP tasks
 
 
Requirements:
·          Ph.D or master degree in Electrical Engineering with focus on Communications Engineering
·          Expert knowledge in Digital Signal Processing and Communications Engineering
·          Proven experience in implementing DSP FW for 3GPP Standards like GSM or UMTS
·          Experience in SW/FW design for embedded real-time systems
·          Good knowledge on optimised implementations of DSP algorithms
·          Fluent in spoken and written English
6.    Platform Concept Engineer
 
Job Description:
 
·          Responsible for quality and completeness of customer and system requirements for mobile phone platforms and components. About 2 projects in parallel with 1000 - 2000 requirements each depending on project scope.
·          Participation in continuous improvement activities for requirements management and engineering.
·          Product Requirements Management
·        Overall responsibility for Requirements Repository and documents
·        Gathering and elicitation of requirements/ needs from stakeholders
·        Requirements interface between the development team and internal and external customers/ stakeholders
·        Supports mapping of requirements to components
·        Monitors and tracks: quality of requirements and traceability
·        Drives requirement reviews
·        Requirements change handling/ participation in CCBs
·        Answers request for information together with sales, marketing and technical experts.
·           Participation in continuous improvement activities
·        Alignment across chip and platforms projects in regular meetings
·        Provide customer requirements for reuse
·        Participate in continuous process and methodology improvement (TEC RE)
·          Be internal and external interfaces operate on an international basis.
·        Internal: Business Line Marketing and System / Concept Engineering, Verification Management, Project and Program Management, Quality Management.
·        External: IFX customers.
 
Requirements:
·          Ph.D or Master Degree on Electronics Engineering/Communication/ Microelectronics or relevant
·          Professional experience in System Engineering or related disciplines
·          Fluent in English
·          Good expertise in Requirements Management
·          Rational Requisite Pro
·          MS Office (desirable including VBA)
·          Adobe Framemaker (desirable)
·          Social and communicative skills
·          Self-organization
 
 
 
 
7.   Platform Concept Engineer (Feature Requirement Management)
 
Job Description:
·         Responsible for quality and completeness of customer and system requirements for mobile phone platforms and components, about 2 projects in parallel with 1000 - 2000 requirements each depending on project scope
·         Participation in continuous improvement activities for requirements management and engineering
·         Product Requirements Management
·         Overall responsibility for Requirements Repository and Documents
·         Gathering and elicitation of requirements/ needs from stakeholders
·         Requirements interface between the development team and internal and external customers/ stakeholders
·         Supports mapping of requirements to components
·         Monitors and tracks: quality of requirements and traceability
·         Drives requirement reviews
·         Requirements change handling/ participation in CCBs
·         Answers requests for information together with sales, marketing and technical experts
·         Participation in continuous improvement activities
·         Alignment across platforms and customer projects in regular meetings
·         Provide customer requirements for reuse
·         Participate in continous process and methodology improvement (TEC RE)
·         Both internal and external interfaces operate on an international basis.
·         Internal: Business Line Marketing and System Engineering, Verification Management, Project and Program Management, Quality Management.
·         External: IFX customers and Network operators.
 
 
Requirements:
·         Master in EE or equivalent
·         3 years + experience in relevant field
·         Professional experience in System Engineering or related disciplines
·         Good knowledge of IFX development processes with focus on System/ Product Definition is a plus
·         Fluent in English
·         Good expertise in Requirements Management
·         Rational Requisite Pro
·         MS Office (desirable including VBA)
·         Adobe Framemaker (desirable)
·         Social and communicative skills
·         Self-organization
 
 
  • 上一篇文章:东华理工大学2011年人才招聘
  • 下一篇文章:上海贝尔招聘研究员和博士后
  • 返回顶部